Blog

Short answer: IEC 60034-30-1 defines the efficiency classes (IE1–IE4) of mains-powered AC motors. The higher the IE (International Efficiency) code, the better the motor's efficiency...

Short answer: IEC 60034-2-1 defines test methods used to determine losses and efficiency in electric motors. Measuring the actual efficiency of a motor…

Short answer: IEC 60034-1 is the fundamental standard defining the ratings and performance of rotating electrical machines (specifically motors). It also defines the types of operation (duty type…).

Short answer: IECQ is an international system for the quality assessment and certification of electronic components. By documenting the reliability of component manufacturers and the supply chain,…

Short answer: IECRE is an international conformity assessment and certification system for the renewable energy sector (wind, solar/PV, and marine energy).

Short answer: The IECEE CB Scheme is a global mutual recognition system for the safety conformity of electrical and electronic products. A standard set of standards in one country…

Short answer: IECEx is a global conformity assessment system that provides international certification for equipment, services, and personnel used in explosive atmospheres (ATEX/Ex-Proof).

Short answer: ISO/IEC 17024 is an international standard that defines the general requirements for personnel certification bodies. It specifies that individuals must have a specific qualification (e.g., welder, NDT…).

Short answer: IEC 60364-7-708 defines specific safety regulations for electrical installations in caravan parks, campgrounds and similar places. Outdoor,…

Short answer: IEC 61850 is a standard for communication networks in substations and energy automation. It is common to intelligent electronic devices (IEDs) from various manufacturers…

Short answer: IEC 61869 is the standard for accuracy, performance, and safety of current (CT) and voltage (VT) measuring transformers (replacing the older IEC 60044…).

Short answer: The ISO 8528 series is a set of international standards that define the power classification, performance, and safety of diesel and natural gas generator sets (formerly…).

Short answer: The IEC 62561 series covers all components that make up a lightning protection system (LPS) — including terminal blocks, conductors, grounding electrodes, holders, etc.

Short answer: IEC 62305 is the international lightning protection standard applied to protect buildings against direct lightning strikes and indirect overvoltages.

Short answer: IEC 60079-31 defines the 'Enclosure Protection (Ex t)' type for flammable dust environments. It seals the equipment against dust ingress…

Short answer: IEC 60079-29 defines the performance, selection, installation, use, and maintenance requirements for flammable gas detectors. It provides warning before an explosive atmosphere forms…

Short answer: IEC 60079-25 defines Intrinsically Safe Systems (IS systems). This refers not to a single device, but to a field device + barrier + cabling…

Short answer: IEC 60079-19 regulates the repair, revision, and reclamation processes for explosive atmosphere equipment. When an Ex equipment malfunctions, haphazard repair…

Short answer: IEC 60079-17 covers the service life of electrical installations and equipment located in explosive atmospheres (gas, vapor or dust) after initial installation…

Short answer: IEC 60079-14 regulates the design, equipment selection and installation of electrical installations in explosive atmospheres. It also includes area classification (60079-10) and periodic inspections…