Short answer: A grounding measurement report is an official record documenting that a measurement has been taken and that the installation is suitable. Its validity period extends until the next periodic inspection…
Short answer: According to relevant legislation, periodic inspections of grounding systems in workplaces should generally be carried out at least once a year. This...
Short answer: The required grounding resistance in ohms is not a single fixed value; it depends on the system type (TT, TN), the protective device, and…
Short answer: Grounding measurement is an electrical test performed to determine whether a facility's grounding system can safely conduct fault current to the ground. The most...
Short answer: Accredited periodic inspection is an inspection carried out by an inspection body authorized by TÜRKAK according to the TS EN ISO/IEC 17020 standard. This…
Short answer: A periodic inspection report is an official record documenting that an inspection has been carried out and that the equipment is compliant. Its validity period extends until the next periodic inspection of the equipment…
Short answer: As a general rule, work equipment should undergo periodic inspections at least once a year. However, the relevant standard, manufacturer's instruction, or…
Short answer: Yes, periodic inspection of work equipment is a legal requirement. This is stipulated by Law No. 6331 on Occupational Health and Safety and related regulations…
Short answer: IEC 60034-14 defines the measurement, evaluation, and limit values for mechanical vibration of electric motors. Vibration is one of the most important indicators of a motor's health condition...
Short answer: IEC 60034-9 defines the noise (acoustic) limits for electric motors. By specifying the permissible sound power levels of motors, it protects both worker health and safety…
Short answer: IEC 60034-8 standardizes terminal markings and direction of rotation in electric motors. It specifies how each terminal should be labeled and the motor's orientation at a particular connection point…
Short answer: IEC 60034-5 defines the protection levels (IP code) for rotating electrical machines. The IP code indicates the motor's resistance to solid objects (dust) and…
Short answer: IEC 60034-30-1 defines the efficiency classes (IE1–IE4) of mains-powered AC motors. The higher the IE (International Efficiency) code, the better the motor's efficiency...
Short answer: IEC 60034-2-1 defines test methods used to determine losses and efficiency in electric motors. Measuring the actual efficiency of a motor…
Short answer: IEC 60034-1 is the fundamental standard defining the ratings and performance of rotating electrical machines (specifically motors). It also defines the types of operation (duty type…).
Short answer: IECQ is an international system for the quality assessment and certification of electronic components. By documenting the reliability of component manufacturers and the supply chain,…
Short answer: IECRE is an international conformity assessment and certification system for the renewable energy sector (wind, solar/PV, and marine energy).
Short answer: The IECEE CB Scheme is a global mutual recognition system for the safety conformity of electrical and electronic products. A standard set of standards in one country…
Short answer: IECEx is a global conformity assessment system that provides international certification for equipment, services, and personnel used in explosive atmospheres (ATEX/Ex-Proof).
Short answer: ISO/IEC 17024 is an international standard that defines the general requirements for personnel certification bodies. It specifies that individuals must have a specific qualification (e.g., welder, NDT…).
Kazım Özalp Mah. Kuleli Cad. No:39 GOP Çankaya Ankara / Türkiye
Yenişehir Neighborhood, Ulubatlı Street, KKÜ Technopark 1st R&D Building No:30/24 Yahşihan / KIRIKKALE