Electrical Safety in Healthcare Facilities and Hospitals

Sectoral Solutions for Clinics and Medical Operating Centers

In hospitals, power outages mean not just a loss of revenue, but a loss of life. Are you having your insulation monitoring and generator pass-through safety tests professionally conducted in intensive care (Group 2) rooms?

INFORMATION REQUESTCONTACT US
AES Innovation

Uninterrupted Quality and Zero Risk in Healthcare Services

Healthcare facilities are places where critical life support systems, such as operating rooms, dialysis centers, and radiology rooms, rely on 24/7 electrical power. At AES Innovation, we inspect and report on the infrastructure of your healthcare facilities according to national and international (IEC 60364-7-710) guidelines applied in the medical field, and provide accredited reports.

In IT systems, especially those using isolation transformers, the immediate detection of potential leaks and sensitivity analysis of RCD systems are crucial steps in protecting your patients from direct microshocks.

Plumbing Inspection Process for Hospital Management

What should be checked in medical fields?

  • Isolation Monitoring (IT System) Device Verification:
    In Group 2 rooms, such as operating rooms and intensive care units, the simulation determines whether a medical IT system triggers an alarm when its insulation resistance drops below 50 kΩ.
  • Equipotential Containment and Shielding:
    Faraday cages in MRI rooms or radiology units and all metal surfaces that the patient may come into contact with (Tested to ensure it is connected to the mains ground (<0.2 Ohm).
  • Generator and UPS Power Supply Transition Time:
    When the power supply drops, millisecond measurements confirm that emergency power reaches surgical lamps and life support devices within standard limits (such as 0.5 seconds).
  • Panel Thermal Analysis and Load Distribution:
    The heating values of uninterruptible power supplies (UPS) and medical isolation panels (TIPs) under full load are analyzed using thermal cameras.
WHY AES INNOVATION?

Accredited Healthcare, A Reliable Future.

Under the Ministry of Health Inspections (SAS Quality Standards), periodic electrical test reports are now a vital requirement. By working with AES Innovation, you document not just a piece of paper, but an autonomous safety system that will never interrupt your facility's medical operations.

GET A QUOTE NOW
AES Innovation

International Standards and Related Legislation

Hospitals' healthcare facility electrical standards are examined based on the IEC 60364-7-710 directive. This standard is reported in conjunction with the Turkish Ministry of Health's Healthcare Quality Standards (SKS) periodic quality approval for electrical installations.

Frequently Asked Questions

The most common industry-related electrical questions encountered by hospital operations managers and technical staff.

In rooms with critical medical IT systems (Group 2), the legal testing intervals are set at one year (1 year) for occupational safety reasons; however, isolation monitoring screens must be manually tested weekly.

Yes, in operating rooms or bedside intensive care units, any metal object within reach of a patient or doctor should be zeroed with a local Medical Equipotential Bar.

UPS (Uninterruptible Power Supply) outlets are typically red and are intended for critical life systems connected to generators and batteries; they are insulated from mains surges.

To prevent the life support device from shutting off during surgery, a special system (IT network) is installed, and in the event of the first malfunction, the system does not cut off the power, it only gives an alarm. Detection of this using specialized equipment is essential.

AES Innovation

How can you contact us?

+90 850 532 71 89+90 312 806 45 71info@aesinn.comWhatsApp
+90 530 323 7068
TOPICS THAT MAY INTEREST YOU:
News & Bulletins
OUR OTHER SERVICES: