TS EN 60079 Conformity Checks and Ex-Proof Inspection
TS EN 60079 Series Conformity ChecksIn industrial facilities where explosive environments are present, safety is a legal obligation, not a choice. AES Innovation As such, with our expert engineering staff, we can provide electrical and mechanical equipment services for your facilities. TS EN 60079 We monitor compliance with the standards series at the highest level.
In high-risk sectors such as petrochemicals, natural gas, chemicals, and refining, we prevent workplace accidents and economic losses by minimizing operational errors and assembly defects.
According to legal regulations (Regulation on Protection Against Hazards in Explosive Atmospheres), Ex-Proof equipment must be inspected annually. at least once Periodic inspections are mandatory. AES Innovation manages this process not just as an audit, but as a quality assurance measure for the sustainable safety of your facility.
Type A Inspection Body
Why should you have your compliance check done by AES Innovation?
What does the TS EN 60079 Standard Series cover?
The design, selection, installation, and maintenance of equipment used in explosive atmospheres are subject to specific international standards.
TS EN 60079-14
Design, selection, and installation of electrical systems.
TS EN 60079-17
Inspection and maintenance of electrical installations.
TS EN 60079-10-1/2
Hazardous area (zone) classification for gas and dust environments.
TS EN 60079-19
Repair, maintenance, and service processes for explosion-proof equipment.
Key Components of Our Inspection Process
ATEX Marking and Regional Compliance
Verifying that the Zone where the equipment is located matches the Ex-label information on the equipment.
Installation and Setup Checks
Inspection of cable entry arrangements, gland/connector tightness, and grounding connections according to TS EN 60079-14 standards.
Physical and Mechanical Condition
Detailed inspection of corrosion, cracks, loose bolt connections, and static electricity discharge circuits.
Certificates and Documentation
Confirmation of equipment certifications in accordance with ATEX 2014/34/EU directive and compliance with Explosion Protection Document (EPD).
Types of Protection and Inspection Criteria for Explosion-Proof Equipment
| Protection Type | Technical Description | Main Focus of Examination |
|---|---|---|
| Ex d (Flameproof) | Flame-Resistant Casing | Housing integrity, flamepath spacing, bolt and fitting tightness. |
| Ex i (Intrinsic Safety) | Intrinsically Safe Circuit | Energy limiting barriers, cable separations, and electrical parameter compliance. |
| Ex e (Increased Safety) | Increased Safety | Connection looseness, IP protection class, and surface temperature control. |
Frequently Asked Questions
How can you contact us?
WHY AES INNOVATION?
AES Innovation: Your Reliable Partner in Explosive Environments
AES Innovation, With over 15 years of field experience, we offer customized Ex-Proof inspection solutions for your industrial facilities throughout Türkiye. We not only identify non-conformities, but also provide technical consultancy to minimize your risks and guarantee your legal compliance. Contact us now for a free inventory analysis.