Articles

Short answer: A grounding measurement report is an official record documenting that a measurement has been taken and that the installation is suitable. Its validity period extends until the next periodic inspection…

Short answer: According to relevant legislation, periodic inspections of grounding systems in workplaces should generally be carried out at least once a year. This...

Short answer: The required grounding resistance in ohms is not a single fixed value; it depends on the system type (TT, TN), the protective device, and…

Short answer: Grounding measurement is an electrical test performed to determine whether a facility's grounding system can safely conduct fault current to the ground. The most...

Short answer: Accredited periodic inspection is an inspection carried out by an inspection body authorized by TÜRKAK according to the TS EN ISO/IEC 17020 standard. This…

Short answer: A periodic inspection report is an official record documenting that an inspection has been carried out and that the equipment is compliant. Its validity period extends until the next periodic inspection of the equipment…

Kısa yanıt: Genel kural, iş ekipmanlarının yılda en az bir kez periyodik kontrolden geçirilmesidir. Ancak ilgili standart, üretici talimatı veya…

Short answer: Yes, periodic inspection of work equipment is a legal requirement. This is stipulated by Law No. 6331 on Occupational Health and Safety and related regulations…

GROUNDING AND LIGHTNING PROTECTION SYSTEMS IN WIND TURBINES Mustafa Kemal AVŞAROĞLU, Tuğcan TEKİN, Sevim SERİNDAĞ RADSAN A.Ş. mavsaroglu@radsan.com.tr, tt@radsan.com.tr, sserindag@radsan.com.tr ABSTRACT…

STATIC ELECTRICITY F. Ünal TOKTA Ş. Electrical Engineer, Technical Safety Consultant 1) WHAT IS STATIC ELECTRICITY AND HOW IS IT FORMED? Static electricity (or static electricity…)

10th National Congress of Electrical, Electronics, and Computer Engineering: Comparison of Soil Impedance and Resistance Measurement Methods. Onur Katipoğulları, Gebze High Technology Institute…

THREE-DIMENSIONAL DESIGN OF GROUNDING NETWORKS Fikri Barış UZUNLAR baris.uzunlar@tr.schneider-electric.com Özcan KALENDERLİ ozcan@elk.itu.edu.tr Istanbul Technical University, Faculty of Electrical and Electronics Engineering, Department of Electrical Engineering,…

GROUNDING RESISTANCE CALCULATIONS İsa İlisu - Electrical Engineer Grounding systems within electrical energy systems are crucial for safety and the technical aspects of the network…

Why is Lightning Protection Risk Analysis Done, and Should We Install Lightning Rods on Every Building? Why is Lightning Protection Risk Analysis Done, and Should We Install Lightning Rods on Every Building?

Research by Electrical Engineer Ahmet Becerik ahmet.becerik@emo.org.tr 16-The Importance of Grounding in High-Rise Buildings: All types of building operating systems used in high-rise buildings…

IECEx - CERTIFICATION AND QUALIFICATIONS OF PERSONS (CoPC and ISO IEC 17024) Emre Metin - Electrical Engineer emre.metin@emo.org.tr • Woodworking fields. •…

Beton İletken mdr? Beton İletken mdr? Topraklama şlevnde rolü nedr? Sahada karşılaştığımız bu soruya standartda güzel br açıklama yapılmıştır: TS…

10th National Congress of Electrical, Electronics, and Computer Engineering: Calculation of Potential Distribution Around a Rod Grounding Rod Using the Finite Difference Method. Özcan…

(cid:20)(cid:3)(cid:13)(cid:12)(cid:8)(cid:12)(cid:5)(cid:14)(cid:13)(cid:15)(cid:6)(cid:19)(cid:16)(cid:12)(cid:8)(cid:15)(cid:21)(cid:12)(cid:11)(cid:15)(cid:4)(cid:9)(cid:17)(cid:3)(cid:17)(cid:12)(cid:4)(cid:8)(cid:12)(cid:5)(cid:14)(cid:13)(cid:6)(cid:12) (cid:4)(cid:19)(cid:27)(cid:5)(cid:12)(cid:7)(cid:8)(cid:12)(cid:10)(cid:12)(cid:15)”#(cid:15)(cid:23)(cid:12)(cid:4)(cid:12)(cid:8)(cid:14)(cid:15)(cid:15)(cid:26)(cid:2)(cid:21)(cid:26)(cid:8)(cid:12)(cid:10)(cid:12)(cid:8)(cid:12)(cid:5) (cid:6) &(cid:27)(cid:3)”(cid:3)(cid:6)8(cid:3)(cid:7)(cid:5)”(cid:5)#,(cid:6)&#(cid:7),(cid:5)’&’(cid:3),-(cid:27)8(cid:3)(cid:27)(cid:7)0(cid:5)”(cid:5)F&”(cid:5)(cid:26)(cid:5)#(cid:7),(cid:5)+”&#(cid:5)”(cid:5)(cid:6)(cid:5) #(cid:3)(cid:6)3-(cid:7)(cid:3)”-(cid:27)(cid:3)(cid:27)(cid:7);(cid:27)”(cid:5)(cid:4)”(cid:5)(cid:6)(cid:7)&:&(cid:27)8(cid:5)(cid:7)F&(cid:27)(cid:3)8(cid:3)(cid:7)F*”*(cid:27)(cid:3)(cid:27)(cid:7)F%,%(cid:27) (cid:4)(cid:5),(cid:3)”(cid:7)#-’-(cid:4)”(cid:3)(cid:6)-(cid:27)(cid:7)(cid:5)39$,(cid:3)(cid:27)’&((cid:5)”(cid:7)F(cid:3)2″(cid:3)(cid:27)(cid:4)(cid:3)’-B(cid:7)8(cid:3)+(cid:3)(cid:7)(cid:3):-# &A(cid:3)8(cid:5)(cid:7) &”(cid:5)(cid:7) (cid:3)((cid:27)-(cid:7) 9$,(cid:3)(cid:27)’&((cid:5)”8(cid:5)(cid:7) ,*,*”(cid:4)(cid:3)’-(cid:7) 0(cid:5)(cid:6)(cid:5)#(cid:4)(cid:5)#,(cid:5)8&(cid:6)(cid:18)(cid:7) (cid:30)* (cid:4)(cid:3)#’(cid:3),”(cid:3)(cid:7)F&(cid:27)(cid:3)(cid:27)-(cid:27)(cid:7)(cid:3)(cid:27)(cid:3)(cid:7),(cid:3)F”$’*(cid:7)(cid:26)&.(cid:3)(cid:6)-(cid:27)8(cid:3)(cid:7)F&(cid:6)(cid:7)F(cid:3)(cid:6)(cid:3)(cid:7)$”*3,*(cid:6)*”(cid:3)(cid:6)(cid:3)#B (cid:5)”(cid:5)#,(cid:6)&#(cid:7),(cid:5)’&’(cid:3),-(cid:27)-(cid:27)(cid:7)F%,%(cid:27)(cid:7)#$(cid:6)*(cid:4)(cid:3)(cid:7)+(cid:3),”(cid:3)(cid:6)-(cid:7)F*(cid:7)F(cid:3)(cid:6)(cid:3)8(cid:3)(cid:7),$9″(cid:3)(cid:27)8-2- 0&F&B(cid:7)F&(cid:27)(cid:3)(cid:7)&:&(cid:27)8(cid:5)#&(cid:7)(cid:4)(cid:5),(cid:3)”(cid:7)F$(cid:6)*(cid:7),(cid:5)’&’(cid:3),”(cid:3)(cid:6)-(cid:7)H#(cid:3)”$(cid:6)&A(cid:5)(cid:6)(cid:7)F$(cid:6)*”(cid:3)(cid:6)-B 8$2(cid:3)”(cid:7) 0(cid:3)(cid:25)(cid:7) F$(cid:6)*”(cid:3)(cid:6)-B(cid:7) ’*(cid:7)…

Turkish Chamber of Electrical Engineers (TMMOB) Grounding Measurements in Electrical Installations and Evaluation of Measurement Results Note: This study was conducted by Electrical Engineer Taner İRİZ and…