Articles

Short answer: Grounding measurement is an electrical test performed to determine whether a facility's grounding system can safely conduct fault current to the ground. The most...

Short answer: Accredited periodic inspection is an inspection carried out by an inspection body authorized by TÜRKAK according to the TS EN ISO/IEC 17020 standard. This…

Short answer: A periodic inspection report is an official record documenting that an inspection has been carried out and that the equipment is compliant. Its validity period extends until the next periodic inspection of the equipment…

Short answer: As a general rule, work equipment should undergo periodic inspections at least once a year. However, the relevant standard, manufacturer's instruction, or…

Short answer: Yes, periodic inspection of work equipment is a legal requirement. This is stipulated by Law No. 6331 on Occupational Health and Safety and related regulations…

10th National Congress of Electrical, Electronics, and Computer Engineering: Comparison of Soil Impedance and Resistance Measurement Methods. Onur Katipoğulları, Gebze High Technology Institute…

THREE-DIMENSIONAL DESIGN OF GROUNDING NETWORKS Fikri Barış UZUNLAR baris.uzunlar@tr.schneider-electric.com Özcan KALENDERLİ ozcan@elk.itu.edu.tr Istanbul Technical University, Faculty of Electrical and Electronics Engineering, Department of Electrical Engineering,…

GROUNDING RESISTANCE CALCULATIONS İsa İlisu - Electrical Engineer Grounding systems within electrical energy systems are crucial for safety and the technical aspects of the network…

Research by Electrical Engineer Ahmet Becerik ahmet.becerik@emo.org.tr 16-The Importance of Grounding in High-Rise Buildings: All types of building operating systems used in high-rise buildings…

Is concrete conductive? What is its role in grounding? The standard provides a good explanation for this question we encounter in the field: TS…

10th National Congress of Electrical, Electronics, and Computer Engineering: Calculation of Potential Distribution Around a Rod Grounding Rod Using the Finite Difference Method. Özcan…

(cid:20)(cid:3)(cid:13)(cid:12)(cid:8)(cid:12)(cid:5)(cid:14)(cid:13)(cid:15)(cid:6)(cid:19)(cid:16)(cid:12)(cid:8)(cid:15)(cid:21 )(cid:12)(cid:11)(cid:15)(cid:4)(cid:9)(cid:17)(cid:3)(cid:17)(cid:12)(cid:4)(cid:8)(cid:12)(cid:5)(cid:14)(cid:13)(cid:6)(cid:12) (cid:4)(cid:19)(cid:27)(cid:5)(cid:12)(cid:7)(cid:8)(cid:12)(cid:10)(cid:12)(cid:15)”#(cid:15)(cid:23)(cid:12)(cid:4)( cid:12)(cid:8)(cid:14)(cid:15)(cid:15)(cid:26)(cid:2)(cid:21)(cid:26)(cid:8)(cid:12)(cid:10)(cid:12)(cid:8)(cid:12)(cid:5) (cid:6) &(cid:27)(cid:3)”(cid:3)(cid:6)8(cid:3)(cid:7)(cid:5)”(cid:5)#,(cid:6)&#(cid:7),(cid:5)'&'(cid:3),-(cid:27)8(c id:3)(cid:27)(cid:7)0(cid:5)’(cid:5)F&’(cid:5)(cid:26)(cid:5)#(cid:7),(cid:5)+”&#(cid:5)”(cid:5)(cid:6)(cid:5) #(cid:3)(cid:6)3-(cid:7)(cid:3)”-(cid:27)(cid:3)(cid:27)(cid:7);(cid:27)”(cid:5)(cid:4)”(cid:5)(cid:6)(cid:7 )&:&(cid:27)8(cid:5)(cid:7)F&(cid:27)(cid:3)8(cid:3)(cid:7)F*”*(cid:27)(cid:3)(cid:27)(cid:7)F%,%(cid:27) (cid:4)(cid:5),(cid:3)”(cid:7)#-'-(cid:4)”(cid:3)(cid:6)-(cid:27)(cid:7)(cid:5)39$,(cid:3)(cid:27 )'&((cid:5)”(cid:7)F(cid:3)2″(cid:3)(cid:27)(cid:4)(cid:3)'-B(cid:7)8(cid:3)+(cid:3)(cid:7)(cid:3):-# &A(cid:3)8(cid:5)(cid:7) &’(cid:5)(cid:7) (cid:3)((cid:27)-(cid:7) 9$,(cid:3)(cid:27)'&((cid:5)”8(cid:5)(cid:7) ,*,*’(cid:4)(cid:3)'-(cid:7) 0(cid:5)(cid:6)(cid:5)#(cid:4)(cid:5)#,(cid:5)8&(cid:6)(cid:18)(cid:7) (cid:30)* (cid:4)(cid:3)#'(cid:3),”(cid:3)(cid:7)F&(cid:27)(cid:3)(cid:27)-(cid:27)(cid:7)(cid:3)(cid:27)(cid:3)(cid:7),(cid:3)F’$'*(cid:7)( cid:26)&.(cid:3)(cid:6)-(cid:27)8(cid:3)(cid:7)F&(cid:6)(cid:7)F(cid:3)(cid:6)(cid:3)(cid:7)$”*3,*(cid:6)*’(cid:3)(cid:6)(cid:3)#B (cid:5)”(cid:5)#,(cid:6)&#(cid:7),(cid:5)'&'(cid:3),-(cid:27)-(cid:27)(cid:7)F%,%(cid:27)(cid:7)#$(cid:6 )*(cid:4)(cid:3)(cid:7)+(cid:3),”(cid:3)(cid:6)-(cid:7)F*(cid:7)F(cid:3)(cid:6)(cid:3)8(cid:3)(cid:7),$9″(cid:3)(cid:27)8-2- 0&F&B(cid:7)F&(cid:27)(cid:3)(cid:7)&:&(cid:27)8(cid:5)#&(cid:7)(cid:4)(cid:5),(cid:3)’(cid:7)F$(cid:6)*(cid:7), (cid:5)'&'(cid:3),’(cid:3)(cid:6)-(cid:7)H#(cid:3)”$(cid:6)&A(cid:5)(cid:6)(cid:7)F$(cid:6)*”(cid:3)(cid:6)-B 8$2(cid:3)’(cid:7) 0(cid:3)(cid:25)(cid:7) F$(cid:6)*”(cid:3)(cid:6)-B(cid:7) '*(cid:7)…

Turkish Chamber of Electrical Engineers (TMMOB) Grounding Measurements in Electrical Installations and Evaluation of Measurement Results Note: This study was conducted by Electrical Engineer Taner İRİZ and…

Chamber of Electrical Engineers of the Union of Turkish Chambers of Engineers and Architects (TMMOB) 1954 General Technical Specifications and Implementation Principles for Electrical Installations Ankara 2012 ISBN: 978-605-01-0254-3…

GROUNDING METHODS IN MEDIUM VOLTAGE NETWORKS Didem ERGUN SEZER Ergun Elektrik Ltd Şti, İzmir didem@ergunelektrik.com ABSTRACT This study examines the grounding methods of medium voltage networks…

[ TECHN(cid:263)K – ARTICLE ] POTENTIAL(cid:263)WIND BALANCING TT System L1 L2 L3 N Serdar Paker serdar.paker@emo.org.tr L1 L2 L3 In Buildings…

TMMOB Chamber of Electrical Engineers 1 9 5 4 PROJECT and BUILDING INSPECTOR Training Notes for Electrical Engineers PREPARED BY ELECTRICAL ENGINEERS…

GROUNDING AND LIGHTNING PROTECTION SYSTEMS IN WIND TURBINES Mustafa Kemal AVŞAROĞLU, Tuğcan TEKİN, Sevim SERİNDAĞ RADSAN A.Ş. mavsaroglu@radsan.com.tr, tt@radsan.com.tr, sserindag@radsan.com.tr ABSTRACT…

STATIC ELECTRICITY F. Ünal TOKTA Ş. Electrical Engineer, Technical Safety Consultant 1) WHAT IS STATIC ELECTRICITY AND HOW IS IT FORMED? Static electricity (or static electricity…)

10th National Congress of Electrical, Electronics, and Computer Engineering: Comparison of Soil Impedance and Resistance Measurement Methods. Onur Katipoğulları, Gebze High Technology Institute…