Overcurrent Protection and Fuse/Switch Coordination
Overcurrent Protection and Fuse/Switch Coordination IEC 60364-4-43 Selectivity Analysis of Short Circuits, Overloads and Automatic Circuit Breakers A short circuit…
Current Status and Future of Operational Responsibility in High Voltage Installations Workshop
Participation was ensured in the "Current Status and Future of Operational Responsibility in High Voltage Installations" Workshop organized by the Chamber of Electrical Engineers on October 2, 2018.
Participation was ensured in the Panel on Periodic Inspection of Work Equipment and Prevention of Work Accidents.
Participation was ensured in the Panel on Periodic Inspection of Work Equipment and Prevention of Work Accidents organized by the Chamber of Mechanical Engineers. TMMOB Chamber of Mechanical Engineers Istanbul…
İsgüm is in the field for video filming!
The Occupational Safety and Health Institute's Occupational Equipment Unit conducts video recordings in the field with the aim of ensuring standardization in the periodic inspections of occupational equipment and fulfilling its guidance function in the field...
The Periodic Inspection Basic Training Evaluation Board Meeting was held.
A protocol was signed with the organizations providing training in pilot provinces regarding the training of persons authorized to conduct periodic inspections of work equipment, and on December 7th…
Workshop on Changes in Escalator/Moving Walkway Standards
“Yürüyen Merdiven/Bant Standardındaki Değişiklikler” başlıklı çalıştay, 18 Ocak 2019 tarihinde İzmir Tepekule Kongre ve Sergi Merkezi’nde gerçekleştirildi. TS EN 115-1:2017…
Platformder Pays a Study Visit to İsgüm
PLATFORMDER management paid a working visit to İSGÜM. PLATFORMDER, the association of operators, manufacturers and distributors of personnel lifting platforms, visited İSGÜM's Occupational Equipment Department…
Work Equipment Periodic Inspection Specialist Course
“The "Periodic Inspection Specialist Course for Work Equipment" was launched with an opening ceremony held at the Ankara Chamber of Industry's Continuous Education Center. This in-service training course...
Elevated Mobile Work Platform Seminar
The Elevated Mobile Work Platform Seminar, organized by the Ministry of Family, Labor and Social Services, Marmara University and Platformder, will be held on November 5, 2019 at 09:30…
A seminar on work equipment was held at Bursa Osmangazi Municipality.
A training seminar on work equipment was held at Bursa Osmangazi Municipality on Thursday, February 20th. The seminar was attended by the Deputy Mayors and administrative staff from within the municipality…
Meeting on Elevated Mobile Work Platforms
The Meeting on Elevated Mobile Work Platforms was held in Istanbul. The workshop, hosted by a Platformder member company, focused on the periodic inspection form for elevated mobile work platforms…
Workshop on Preparing Training Modules and Advanced Training Procedures and Principles
Workshop on Preparing the Module and Advanced Training Procedures and Principles for Pressure Equipment in Contact with Fire, November 10-11, 2020, Istanbul…
Workshop 2 on Preparing Training Modules and Advanced Training Procedures and Principles
The second workshop on the Preparation of the Module and Advanced Training Procedures and Principles for Pressure Equipment in Contact with Fire was held on December 10, 2020, in Istanbul…
Electrical Engineering Group Advanced Training Module Preparation Workshop
Within the framework of activities to prevent possible work accidents during the use of work equipment, our Ministry, General Directorate of Occupational Health and Safety, Occupational Health and...
Filming of the Forklift Safe Use Video Guide has been completed.
Within the scope of the "Safe Use and Periodic Inspections of Work Equipment" Project, a collaborative effort was carried out with Vestel Elektronik A.Ş. As part of this project…
Filming of the Ysip Safe Use Video Guide has been completed.
Within the scope of the "Safe Use and Periodic Inspections of Work Equipment" Project, a collaborative study was carried out with Acarlar Makine. As part of the project, on November 22-23,…
Filming for the "Packaging and Safe Use of Electrical Work Equipment Video Guide" has been completed.
Within the scope of the "Safe Use and Periodic Inspections of Work Equipment" Project, a collaborative study was carried out with TEKNOTRIM Polyurethane Foam Plastic Molds.
Filming of the Overhead Crane Safe Use Video Guide has been completed.
Our work continues within the scope of the "Safe Use and Periodic Inspections of Work Equipment" Project. We are currently filming a video guide on the safe use of overhead cranes...
The Periodic Inspection Basic Training 2021 Evaluation Board Meeting was held.
The Evaluation Board Meeting, held annually to regularly monitor and evaluate the Basic Training Program on Periodic Inspection of Work Equipment, took place on 21.12.2021…
We attended the Occupational Health and Safety Risk Assessment Symposium.
On December 22, 2021, Erciyes Research University, Kayseri University, and the Association of Occupational Safety Experts organized a conference titled "Occupational Health and Safety Risks..."