February 18, 2027: Battery Passport, QR Code, and Replaceable Batteries Launch Same Day
The peak date for the EU Battery Regulation (EU) 2023/1542 is approaching. On February 18, 2027, three obligations will come into effect simultaneously: a digital battery passport for specific batteries, a QR code for all batteries, and the ability for end-users to remove and replace portable batteries installed in products. Two documents published in the EU Official Journal in October 2026 also clarified the rules before this date. This article is based solely on official texts; each piece of information is given with its article number.
What begins on February 18, 2027?
| Obligation | Who does it include? | Rest |
|---|---|---|
| Battery passport | Every light means of transport (LMT) battery, every industrial battery with a capacity exceeding 2 kWh, and every electric vehicle battery that is placed on the market or put into service | Article 77(1) |
| QR code | All batteries; the QR code format is defined in Annex VI, Section C. | Article 13(6) |
| Portable battery that can be removed and replaced by the end user. | Those who market products containing portable batteries | Article 11; date of application Article 96(2)(a) |
The information revealed by the QR code varies depending on the type of battery. For batteries covered by the passport, the QR code leads directly to the passport. For other batteries, it provides access to label information, the EU declaration of conformity, the due diligence policy report, and information on the prevention and management of waste batteries. For starter-lighting-ignition (SLI) batteries, in addition to these, the amount of recovered cobalt, lead, lithium, and nickel in the active material is also provided (Article 13(6)).
What will be included in the battery passport?
The passport is an electronic record containing information on both the battery model and the individual batteries; information generated during the use of the battery is also included (Art. 77(2)). The content is defined in Annex XIII according to the access layers:
- Publicly available information: Model information such as chemical composition, hazardous substances and critical raw materials, carbon footprint information, responsible procurement, recycled content, rated capacity, voltage ranges, expected life in cycles, commercial warranty period and EU declaration of conformity (Annex XIII, point 1).
- Information available only to those with a legitimate interest and to the Commission: Detailed composition, spare part numbers, disassembly information and safety precautions (Annex XIII, point 2). Legitimate interest is limited to purposes such as the activities of the repairer, remanufacturer, second-life operator and recycler, and the participation of the battery recipient in the energy market (Article 77(2)).
- Information accessible only to notified bodies, market surveillance authorities and the Commission (art. 77(2)(b); Annex XIII, points 2 and 3).
The passport is accessed via QR code. The QR code is linked to a unique identifier assigned by the economic operator placing the battery on the market; both must comply with ISO/IEC 15459 series (parts 1-6) (Article 77(3)). The economic operator placing the battery on the market is responsible for ensuring that the information is accurate, complete and up-to-date; they may authorize another operator in writing for this purpose (Article 77(4)).
On the technical side, the Regulation requires a structure based on open standards, interoperable, machine-readable and not creating vendor lock-in (Article 77(5)). Access to the passport is free. The data is stored by the responsible operator or a party authorized by them; the authorized party cannot sell this data or use it beyond what is required for the service. Even if the operator ceases operations, the passport must remain accessible (Article 78(b)-(e)).
It is also a requirement that the battery passport be fully interoperable with other digital product passports in the environmental design legislation (Article 78(a)). In other words, the infrastructure established for the battery passport is aligned with the DPP preparation under the ESPR; for the technical framework... DPP Standards Guide You can check out our series.
A new passport is issued for the battery that is prepared for reuse, repurposed or remanufactured, linked to the passport of the old one; the passport expires when the battery is recycled (Art. 77(7) and (8)).
Next step to watch: the implementing regulation on legitimate interest
The implementing regulation that will determine who is considered a “legitimate interest holder”, what information these individuals can access and to what extent they can download and share information was expected to be adopted by August 18, 2026 (Article 77(9)). As of November 3, 2026, when this article was prepared, there is no published implementing regulation based on this article in the records of the EU Broadcasting Office. When the regulation is published, the details of the access layers will become clear; we recommend that you keep the access rules updatable for later use when setting up your passport infrastructure.
October 2026: new derogations from the replaceable battery rule
The basic rule for products containing portable batteries is that the battery should be easily removed and replaced by the end user with commercially available tools throughout the product's lifespan. Instructions for use, removal and replacement, and safety information should be provided with the product; this information should also be permanently published on a publicly accessible website (Article 11(1)).
Commission Delegated Regulation (EU) 2026/1770, published on 22 October 2026, rewrote the list of products in which batteries can only be replaced by independent professionals (Article 11(2)). The new list includes:
- Washable devices (including wearable devices) that are regularly exposed to water splashes, running water, or submersion.
- Professional medical imaging and radiotherapy equipment, as well as in vitro diagnostic devices.
- Wearable devices where user access to the battery would compromise security because they are either too small or housed in a dust- and impact-resistant casing.
- By July 31, 2030, electric toys with rechargeable batteries.
- Wireless thermometer probes used in food preparation.
- Products covered by the directive on equipment and protective systems for use in explosive atmospheres (2014/34/EU).
- Implantable systems that deliver medication under the skin
- Telematics devices mounted on the roofs of agricultural and construction machinery.
Exceptions other than medical imaging and in vitro diagnostic devices can only be used if necessary for the safety of the user and the device (2026/1770, article 1). The regulation enters into force on 11 November 2026, the twentieth day after its publication (2026/1770, article 2).
This exception is directly relevant for manufacturers of explosive atmosphere equipment: In a product covered by 2014/34/EU, it is possible to withhold the battery from the end user, but only for safety reasons. Clearly stating this reason in your technical file will answer the first question asked during an inspection.
On the same day, Commission guidance on the harmonized implementation of the provisions on the removability and replaceability of portable and LMT batteries was also published in the C series of the Official Journal of the European Union (C/2026/5531).
Unchanging history, changing history
None of the regulations that have amended the Battery Regulation to date have touched the passport date. (EU) 2025/1561 only amended the due diligence article (Article 48), (EU) 2026/1738 (circularity in vehicle design and end-of-life vehicles) only amended Annex I, and (EU) 2026/1770 amended Article 11(2).
The date that did change concerns due diligence: The implementation date of the battery due diligence obligations for the cobalt, natural graphite, lithium, and nickel supply chain has been postponed from August 18, 2025, to August 18, 2027 (2025/1561, Article 1).
First steps for those selling batteries or battery-based products to the EU.
- Determine whether your product range includes batteries that fall under the scope of the passport: LMT, industrial or electric vehicle battery over 2 kWh (Art. 77(1)).
- Plan where the QR code will open and the label placement for all your batteries (Art. 13(6), Appendix VI Section C).
- If your product has a portable battery, verify end-user replaceability; if not, document in writing which derogation in 2026/1770 and which safety reason you are relying on.
- Select your unique identifier scheme according to ISO/IEC 15459 series (Art. 77(3)). On the DPP side with your defining decisions Using the same diagram simplifies the process.
- Include in the contract who will store the passport data and that the authorization will be in writing (Art. 77(4), Article 78(c)-(e)).
- Monitor the implementing regulation on legitimate interest (Art. 77(9)).
If your buyer in the EU is the economic operator that supplies the battery to the market, then they are responsible for the passport. However, a significant portion of the data (composition, capacity, lifespan, disassembly information) will come from your production and testing records.
Official sources
- Regulation (EU) 2023/1542, batteries and waste batteries — EU Official Journal L 191, 28.7.2023
- Regulation (EU) 2025/1561, postponement of battery due diligence dates — EU Official Journal L, 30.7.2025
- Regulation (EU) 2026/1738, circularity in vehicle design and end-of-life vehicles — EU Official Journal L, 24.7.2026
- Commission Delegated Regulation (EU) 2026/1770, derogations for the replaceability of portable batteries — EU Official Journal L, 22.10.2026
- Commission Notification C/2026/5531, removability and replaceability guidelines — EU Official Journal C, 22.10.2026
Related content: What is a Battery Passport? · Digital Product Passport (DPP) Services