Explosive Atmosphere Equipment (ATEX/Ex-Proof)

AES Innovation provides inspection, zone classification, and legal compliance consultancy services for explosive atmosphere (ATEX/Ex-proof) equipment under IEC 60079. Services are accredited by TÜRKAK (Turkish Accreditation Agency).

  • Gorsel atex exproof 60079

    Explosive Atmospheres (ATEX) / Ex-Proof Electrical Safety

  • ATEXExplosion Proof Equipment Inspection

    ATEX/Ex-Proof Equipment Inspection

  • Aes thumbnail

    Explosive Atmosphere Risk Assessment

  • Aes thumbnail

    Ex-Proof Lighting Systems Inspection

  • Aes thumbnail

    Zone Classification Studies

  • Aes thumbnail

    Ex-Proof Maintenance and Repair Consulting

  • Aes thumbnail

    Periodic Ex-Proof Inspections

  • Ex proof inspection

    TS EN 60079 Conformity Checks and Ex-Proof Inspection

Electrical equipment used in environments containing flammable gases or dusts, such as oil and gas plants, chemical factories, paint and solvent storage facilities, and mines, is subject to much stricter safety requirements than standard equipment.

AES Innovation provides expert engineering services for the selection, installation, and periodic inspection of explosive atmosphere (Ex) equipment, in accordance with the IEC 60079 series of standards and the ATEX Directive.

IEC 60079

(ATEX / Ex-Proof) Inspection and Consulting

WHY AES INNOVATION?

Why is Ex-Proof Inspection Necessary?

Equipment used in explosive atmospheres is manufactured with different protection methods such as powder filling “q”, enhanced safety “e”, and naturally occurring safety “i”, and it is mandatory that these protective properties are maintained without deterioration over time in the field. In Türkiye, according to the ATEX Directive (2014/34/EU) and the Regulation on Explosive Atmospheres in Workplaces (30.04.2013/ÇSGB), periodic inspection of equipment used in Explosive zones is a legal obligation.

GET A QUOTE NOW
info@aesinn.com

Our Scope of Services

Ex-Proof Equipment Field Inspection

Cable entries, seal integrity, IP protection class, and marking compliance are checked using visual, close-up, and detailed inspection levels according to the IEC 60079-17 standard.

Equipment Selection and Suitability Consulting

Technical support for selecting the correct EPL (Equipment Protection Level), protection type, and temperature class (T1-T6) suitable for the region.

Hazardous Area Classification

Designation of Zone 0/1/2 (gas) or Zone 20/21/22 (dust) areas in your facility according to IEC 60079-10 and preparation of Ex zone plans.

Installation and Commissioning Supervision

Compliance check with IEC 60079-14 requirements for new installations or revisions.

Periodic Maintenance and Testing

Function, insulation, and protection integrity tests are performed at intervals determined according to the equipment type.

Frequently Asked Questions

Oil and gas refineries, LPG filling stations, chemical factories, coal mines, grain and sugar silos, paint and solvent production facilities, and timber processing plants are legally required to use Ex-Proof equipment due to the presence of flammable gases, vapors, or dust. In these facilities, Zone 0/1/2 (gas) or Zone 20/21/22 (dust) areas must be identified, and equipment in the appropriate category for each zone must be selected.

According to the Occupational Health and Safety Law No. 6331 and the Regulation on Health and Safety Conditions in the Use of Work Equipment, periodic inspections of explosive atmosphere equipment must be carried out at least once a year. The scope of the inspection includes visual, close and detailed inspection levels according to the EN 60079-17 standard; more frequent intervals may be applied in critical areas such as Zone 0 and Zone 20 where the risk is high.

No. Inspection of explosive atmosphere equipment must be carried out by competent engineers who have received specialized training in explosion protection principles, protection types, and related standards under IEC 60079-17. AES Innovation, with its TÜRKAK TS EN ISO/IEC 17020:2012 Type A accreditation, provides services as a fully authorized and independent inspection body in this field.

AES Innovation

How can you contact us?

+90 850 532 71 89+90 312 806 45 71info@aesinn.comWhatsApp
+90 530 323 7068

Free: ATEX Compliance Checklist

Zone classification, Ex sign reading, and periodic inspection. Fill out the form, and the PDF will be sent to your email.

Download