Electrical Safety in Sauna Facilities

IEC 60364-7-703 Standard Technical Guidance

Saunalar ekstrem miktarda sıcaklık artışının (%100 nem ile kombine) yarattığı en agresif ıslak hacimlerdendir. Ahşap yapının yanmasını engelleyecek bölgeleme ve kablolama kriterleri otel testlerinde nasıl kontrol edilir?

INFORMATION REQUESTCONTACT US
AES Innovation

Not Chlorinated Water, but Hot Steam and Thermal Losses

IEC 60364-7-703 standard is a safety fortress and protection design specifically designed for sauna rooms. Unlike hammam constructions, shower cabins, or steam rooms, the primary cause of damage in saunas is not water splashing, but the exceptionally high thermal destructive power emitted by the resistance sauna stove, burning the piping. With AES Innovation's guarantee, we conduct your electrical testing projects in SPA centers with zero non-conformity.

The sauna's volume is divided into zones like Zone 1, Zone 2, etc., similar to the rules for bathrooms. Furthermore, considering that temperatures can reach 125°C at the ceiling and radiant heat in the area closest to the stove (Zone 1), all plastic-based and flammable plumbing and piping structures are left beyond the doorways.

Monitoring of Thermal Disruption Risk Zone Boundaries

What is periodically measured in a sauna room?

  • Thermal Resistant (Non-Flammable) Cable and Insulation Measurement:
    In the Zone area, visual and electrical data checks are performed to ensure that the material near the stove (heater) area or extending towards the ceiling provides resistance to high temperatures (at least 120-170°C equivalent to asbestos) and contains silicone or Teflon.
  • Special RCD Testing and Device Insulation:
    Unlike the electrical load that powers the stove, the RCD circuit breaker mechanism mounted on the panel assembly has a minimum load. Its operation at a current duration of <30mA is calculated using reaction simulation.
  • Heat Corridor (Zoning) Limits Around the Stove:
    It is checked whether the installation plan has been followed. It is visually determined that the switches or thermostat electronic equipment are located in Zone 3, the furthest zone from the stove.
  • Wooden Frame and Ground Grounding Dimensions:
    The stove's iron structure is measured and meggered to ensure that the connection to the installation, and if present, the equipotential bond of its outer surface profile to the main busbar, is precisely registered without ohmic deviation.
WHY AES INNOVATION?

A spa center should talk about quality, not health risks.

In many small-scale luxury and local residential hotels, saunas installed by inexperienced electricians often use standard NYM electrical plaster embedded in wooden panels, which melts as the room heats, causing short circuits and fires. This ensures your guests' comfort and well-being by equipping their accommodations with a high level of technical quality. AES Innovation, The measurement process, compliant with IEC 60364-7-703, enhances your brand's risk perception and brings prestige.

GET A QUOTE NOW
AES Innovation

International Standards and Related Legislation

While the plumbing analysis procedure for wooden ovens or indoor sauna spaces is examined directly within the framework of TS HD 60364-7-703, the mechanical properties of the heat-generating stove are documented according to IEC 60335-2-53 (steam apparatus and resistance), and the grounding is also inspected with multi-dimensional support according to RCD (IEC 61008/9) directives.

Frequently Asked Questions

Installation hazard questions related to the installation of steam saunas in thermal spas or hotels.

Absolutely not allowed! Due to indoor thermal limits, manual control equipment such as electrical switches or fuses must always be located outside the sauna room (as a standard requirement).

In a sauna room, lighting or heat-resistant sensor components must be connected using a SELV (Seamless Power Supply) method, either in a structure that can withstand temperatures up to 125 degrees Celsius or in a cool area (usually the lower half) that is least likely to be reached by the ceiling/stove.

Since the room is humid, authorized personnel will need to be satisfied that the insulation of these types of heating materials and control terminals meets at least IP24 protection standards.

All panels are secured, excluding the load carried by the devices, and also protect human life (factors affecting life safety). It is subject to a fast-response RCD relay operating within a <30 mA limit and must remain functional.

AES Innovation

How can you contact us?

+90 850 532 71 89+90 312 806 45 71info@aesinn.comWhatsApp
+90 530 323 7068
TOPICS THAT MAY INTEREST YOU:
News & Bulletins
OUR OTHER SERVICES: