Safety of Outdoor Lighting and Street Lamp Installations

IEC 60364-7-714 Standard Technical Guide

Open parking lots, streets, tunnels, and highway lighting poles, which are central to rain and natural erosion, pose a risk of high-body energy leakage to street animals and children.

INFORMATION REQUESTCONTACT US
AES Innovation

Full Public Safety in Urban Fabric and Parking Areas

Road, courtyard, and campus exterior lighting equipment designed according to IEC 60364-7-714 standard requirements falls into the category of high-voltage structures particularly susceptible to impacts from harsh environmental factors. The AES Innovation team provides accredited inspections for leakage hazards caused by corrosion, ranging from perimeter lighting on your private factory site to highway or park lighting in public areas.

Aluminum or steel floodlight poles, which face risks of vandalism and car collisions, must be tested to eliminate the possibility of lethal phase current leakage from the metal surface to the ground (via the human body) if cables are blown away by a storm or insulation deteriorates.

Compliance Process with External Faults (IP/IK Class)

What does a street, tunnel, and park lighting system test include?

  • Lighting Unit Grounding (TT Line) and Resistor:
    All galvanized pole structures are tested with millimeter precision using a megger resistance reader to connect to the mains protective PE line or ground earthing via the connection terminal points.
  • Terminal Cover, Sealing and IP Verification:
    The terminal and locking area inside the pole's bottom cover are inspected for accessibility by hands, foreign objects, or excessive water, meeting a minimum IP33 or IP44 rating for panels.
  • Resistance to External Impacts (IK Class):
    In areas exposed to collisions with motor vehicles or personnel, fixture components are evaluated for compliance with the mechanical deterioration coefficient test protection standard.
  • Residual Current (RCC) Protective Relay Functionality:
    On-site, it is connected to the main connection line of the circuit group that distributes the street pole line or establishes panel automation, and it has an instant circuit breaker tripping function. Equipment performance is checked at <30mA.
WHY AES INNOVATION?

Don't leave outdoor safety to chance.

A young child clinging to an energized lamppost on their way home from school can cause a disabling RCD or a corroded, rusty grounding system, leading to the dreaded public safety disaster. Our ISO-certified IEC 60364-7-714 control measurement service, offered by AES Innovation, prioritizes preventing darkness and risk in public or private lighting systems, guaranteeing compliance with legal limits through a certified report.

GET A QUOTE NOW
AES Innovation

International Standards and Related Legislation

Technical test documentation for perimeter luminaires and lighting installations proceeds under the guidance of the TS HD 60364-7-714 directive, and in these designs, cable underground penetration limits (e.g., 80cm piping insulation, etc.) must be examined in full compliance with TEDAŞ internal installation regulations, while IP/IK restrictions for street lamp luminaires must comply with the IEC 60598-2-3 legal directive.

Frequently Asked Questions

Rules for ensuring the absence of current leaks in outdoor environmental highway or site perimeter lighting.

Yes! Since outdoor lighting equipment will be exposed to contact with public and civilian personnel, the circuit will be switched off from the panel. It must be ensured that the circuit is cut off with a leakage rate of <30mA, i.e., at the life threshold value at the point of contact with a human.

The insulation level on the line from the main distribution panel to the terminal on the pole is verified underground using our specialized megger measuring tools and high-current testing.

According to the IEC 60364-7-714 standard and urban regulations, the terminal block lock cover and lighting fixture must have complete resistance to water and splashes (minimum IP3X, preferably IPX4) in their locking mechanisms.

The standard principle is subject to the same tests, but it is strongly recommended that areas such as on-site playgrounds (landscape lines where direct civilian contact is highest, etc.) be reinforced to a minimum shock safety level, preferably using SELV systems.

AES Innovation

How can you contact us?

+90 850 532 71 89+90 312 806 45 71info@aesinn.comWhatsApp
+90 530 323 7068
TOPICS THAT MAY INTEREST YOU:
News & Bulletins
OUR OTHER SERVICES: