Electrical Safety in Confined and Conductive Spaces

IEC 60364-7-706 Standard Technical Guidance

Silo tankları, gemi kazan boşlukları veya yeraltı dehlizleri gibi hareket serbestliğinin %100 sınırlandığı metalik ortamlarda çalışmak maksimum yalıtım ve SELV devresi gerektirir. Dar alan (Confined Space) periyodik kontrolleri neleri baz alır?

INFORMATION REQUESTCONTACT US
AES Innovation

Minimum Movement Space, Conductive Grounds, and Serious Threat.

The IEC 60364-7-706 'Confined spaces with conductive parts' concept, encountered in maintenance and repair processes in industrial settings, targets uninsulated work areas surrounded by iron. AES Innovation engineers offer specialized inspection infrastructures to help you provide a safe environment for maintenance personnel in pipe tunnels, oil/chemical tanker cleaning spaces, and giant boilers.

Even if a person wears insulating shoes while inside a pipe, their shoulder, wrist, or back is in direct, tight contact with a conductive surface over a large area. In such a situation, a 50-volt leakage will create a kind of grounding path for the body, so the only life-saving solution is the strict application of Source Isolation and SELV (Low Voltage) standards without any compromise.

Restricted Metal Environment Equipment Standards

What does a narrow-space plumbing system inspection examine?

  • Safe Limit Voltage (SELV) Supply Control:
    For hand lighting inside boilers and silos, the use of AC 24V luminaires with mechanical protection, resistant to ambient conditions, is tested.
  • Isolated Disconnector Transformer Placement:
    It is checked that electrical isolation transformers (Class II insulated) used for power tools must be COMPLETELY OUTSIDE the metallic area/working space.
  • Low Leakage Resistance Test:
    At connection points where insulation is provided by conductive surfaces, measurements are taken of the machine tool body and RCD switch (Type A/B) to check their tripping limits in milliseconds.
  • Cable Splice Armor and Mechanical Damage Inspection:
    To protect against metal shavings that may be scattered during grinding and cutting, the power tool power cables are shielded with a polychloroprene H07RN-F rubber sheath to ensure integrity.
WHY AES INNOVATION?

For a Fully Isolated Technical Repair Facility

Sending a worker into a metallic storage tank is in itself a red alert in occupational safety. Ensuring that every drill, cutter, or lighting battery used in these environments has the appropriate periodic insulation rating is the second between life and death. AES Innovation, It aims to comply precisely with the confined space requirements of IEC 60364-7-706, not only through desk-based standards but also through practical and field experience.

GET A QUOTE NOW
AES Innovation

International Standards and Related Legislation

According to the fundamental rule of the standard, if you are going to power Class II equipment (double-insulated appliances) in confined and conductive spaces, each appliance must be insulated with separate, independent secondary winding transformers with a maximum of one socket. This rule is an inviolable technical fundamental criterion of TS HD 60364-7-706 and the Occupational Health and Safety Regulations.

Frequently Asked Questions

The challenges of working with electrical equipment in storage tanks, underground shafts, and closed systems.

No. Simply adding an RCD to equipment powered directly from the 220V mains is insufficient, and according to TS HD 60364-7-706, the entry of a portable tool into metallic environments absolutely requires an Electrical Isolation Transformer and SELV (Seamless Power Supply).

It is strictly forbidden. The transformer or power supply module must be located completely outside of any confined and conductive space (ship tank, etc.).

SELV used (Lighting systems (<50V) must have an absolute protective plastic/metal mesh cage, and the glass bulb must prevent contact with the worker's back/shoulder.

Class II hand power tools without a grounding conductor chassis (with a double square symbol logo emblem) must be adapted to operate in metallic environments.

AES Innovation

How can you contact us?

+90 850 532 71 89+90 312 806 45 71info@aesinn.comWhatsApp
+90 530 323 7068
TOPICS THAT MAY INTEREST YOU:
News & Bulletins
OUR OTHER SERVICES: